Installation Of Your Bizcardholder
1. Place your Bizcardholder in a way that achieves the best results by attaching it to a variety of surfaces in one of the following 4 ways:
- Suction cups onto glass:
Slide the suction cups (supplied) onto the mounting bracket on the back of your Bizcardholder. Push the unit onto the clean glass window in a level position.
- Double-sided tape onto smooth surfaces:
Peel the backing off the double-sided tabs (supplied) and position on the mounting bracket on the back of the Bizcardholder with enough pressure to adhere. Peel off the secondary backing from the tabs and push the unit onto the clean smooth surface in a pre-determined level position.
- Mounts onto fixed screws:
The Bizcardholder can be mounted over screws (screw head must be between 10-15mm in diameter) by sliding the sleeves within the mounting bracket over the heads of the screws, already in the vertical surface. The depth of the screw head will need to be adjusted to ensure a tight fit, with the ideal depth being 3mm.
- Glued permanently onto most clean surfaces:
Place your adhesive onto the mounting bracket on the back of your Bizcardholder and push the unit onto the clean surface in a pre-determined level position. Hold the unit in place until the adhesive has set enough that there is no movement when you let go. You may want to tape or brace the unit to the surface temporarily until the adhesive has cured. (Check the instructions on the back of your adhesive to make sure it is suitable for adhering acrylic to the material you have chosen).
2. Insert your business or promotional cards into the Bizcardholder and let it go to work for you!
Care Of Your Bizcardholder:
To keep your Bizcardholder looking in great condition, wash it as required with a soft cloth and warm soapy water. Never use abrasive cleaners or solvents as these may scratch the surface.
Back to the Bizcardholder page